ANSI PC Chain


 

Home » Products » Chain » Drive Chain » Anti Corrosion Chain » PC Series » ANSI PC

 

ANSI PC Chain

The pins and pin link plates of these chains are made of SUS304 (spring clips SUS301). Engineering Plastic (white) is used for the inner link. This combination makes it a lube-free, low noise (5 dB lower than ANSI standard roller chain) and lightweight chain (50% lighter than ANSI standard roller chain). Working temperature range: -20°C to +80°C. For details on corrosion resistance, please check out our Corrosion Resistance Guide.

Single Strand Details

pc
Tsubaki ANSI PC Chain
Dimensions in mm
Tsubaki Chain No. Pitch
p
Bush Diameter
d1
Inner Width
b1
RF25-PC-1 6.35 1/4" 3.30 3.18
RF35-PC-1 9.525 3/8" 5.08 4.78
RF40-PC-1 12.70 1/2" 7.92 7.95
RF50-PC-1 15.875 5/8" 10.16 9.53
RF60-PC-1 19.05 3/4" 11.91 12.70
Dimensions in mm
Tsubaki Chain No. Pin Link Plate Max. Allowable Load acc. to Tsubaki
kN
Approx. Mass
kg/m
Diameter
d2
Length
L1
Length
L2
Thickness
T
Thickness
t
Height
H (max.)
RF25-PC-1 2.31 4.50 5.50 1.30 0.75 6.00 0.08 0.10
RF35-PC-1 3.59 6.85 7.85 2.20 1.25 9.00 0.18 0.22
RF40-PC-1 3.97 8.25 9.95 1.50 1.50 12.00 0.44 0.39
RF50-PC-1 5.09 10.30 12.00 2.00 2.00 15.00 0.69 0.58
RF60-PC-1 5.96 12.85 14.75 2.40 2.40 18.10 0.88 0.82
  • Make sure to check the chain tension again when replacing Stainless Steel Chain with PC Chain.
  • Offset links are not available.
  • For details on corrosion resistance selection, please consult our Corrosion Resistance Guide.